Send InquiryWXC350CA Semi Automatic Steel Bar Peeling Machine
Product Details:
- Product Type Other
- Technology Other
- Power Source Electricity
- Operating Type Semi Automatic
- Power 380V Volt (v)
- Surface Treatment Painted
- Dimension(L*W*H) 1.8X2.2X1.5 Meter (m)
- Supply Ability : 1000 Set Per Year
Price And Quantity
- 1 Set
- 40000 USD ($)/Set
Product Specifications
- bright bar making
- customzied
- 10 T/hr
- Painted
- 2800 Tonne
- 1 year
- Other
- Electricity
- 1.8X2.2X1.5 Meter (m)
- Semi Automatic
- Other
- 380V Volt (v)
Trade Information
- Qingdao
- Cash Against Delivery (CAD), Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque, Days after Acceptance (DA), Delivery Point (DP), Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C), Telegraphic Transfer (T/T), Western Union, Paypal
- 1000 Set Per Year
- 1 Months
- Contact us for information regarding our sample policy
- seaworthy package
- Asia, Australia, South America, Middle East, Africa
- ISO9001, CE
Product Description
| Model | WXC20 coil to bar | |
| Raw Materials | Diameter range（mm） | coil-bar：Φ5.5~Φ21 |
| Tensile strength σb（Mpa） | ≤900 | |
| Surface roughness | ≤HB320 | |
| Curvature requirement | ≤1. 5 ①（The coil should be cold drawn and rounded, no dead bending.） | |
| Diameter tolerance | d-2-GB/T702-2004 | |
| Roundness | ≤50% of straightness tolerance | |
| Surface roughness（Ra） | ≤25mm | |
| Finished product | single side cutting depth（mm）（peeling） | 0.25~1（The roundness of the raw material shall be within 0.05mm） |
| Diameter range（mm）（peeling） | Coil-bar：Φ5~Φ20 | |
| Diameter tolerance（peeling） | ≤IT10（standard tolerance grade） | |
| Surface roughness（Ra）（peeling） | ≤6.3μm | |
| Roundness(mm) （peeling） | ≤0.03 | |
| Speed（Infinite speed adjustment m/min） | 2.0~20.0（Slow down for the materials with continuous chips, high strength, high hardness or big diameter. ） | |
| Rotating speed of cutter head(stepless speed adjustment)（r/min） | 900~2500 | |
| Main motor power of peeling machine（kW） | 22 | |
| Feeding motor of peeling machine（kW） | 2.2 X2 | |
| Vertical&horizontal straightener motor power（kW） | 4 | |
| servo motor of Cutting device（kW） | 1.5 | |
| Motor power of hub straightening machine（kW） | 7.5 | |
| Note①：The raw materials have to be drawn to be round, no dead bending is allowed. Otherwise it may not enter the main machine and cause accidents.For the peeling machine, the smaller the curvature of the raw material is, the better the effect will get.It will better ensure the accuracy of the finished product, the efficiency and service life of the machine. If there is serious flash, flat head and bending, the flash must be chamfered, the flat head and bending must be cut before enter the peeling machine. | ||
Other Products in 'Peeling Machine' category
- Qianjin Town, Laishan District,Yantai - 264000, Shandong, China
- Fax :86-535-2964763
- Mr Danny (Director)
- Mobile :+8618615932250
- Send Inquiry
Send Inquiry
Send InquiryDeveloped and Managed by Infocom Network Private Limited.
